- Low Tire Pressure: Changes in temperature or a slow leak can trigger the TPMS light.
- Damaged TPMS Sensor: Over time, the sensors might wear out or get damaged.
- Tire Change or Rotation: After tire replacement or rotation, the system may need recalibration.
- Battery Issues in the TPMS Sensors: Although the ID.3 doesn’t require engine oil, its TPMS sensors are still powered by small batteries that may need replacing after several years.
- Software Glitch: Occasionally, software malfunctions can cause a false TPMS warning.
How to Fix Tire Pressure Sensor Issues in Volkswagen ID.3
1. Check Tire Pressure
- Use a tire pressure gauge to check all tires.
- The recommended tire pressure for a Volkswagen ID.3 is usually around 35 psi, but check your owner’s manual for the exact numbers.
- Inflate any low tires, then drive for a few minutes to see if the TPMS warning turns off.
2. Reset the TPMS System
If the pressure is correct and the light remains on, you may need to reset the system:
- Turn on the vehicle (without driving).
- On the infotainment screen, navigate to the vehicle settings.
- Look for the TPMS reset option in the tires section.
- Follow the on-screen prompts to reset the system.
- Drive for 10-15 minutes at a moderate speed to let the system recalibrate.
3. Inspect the TPMS Sensors
- Check the valve stems and sensors for any visible damage.
- If any sensor is malfunctioning or broken, a mechanic can replace it for you.
4. Replace Sensor Batteries
If your Volkswagen ID.3 is a few years old, the TPMS sensor batteries might be low. Most sensors last 5-7 years, and battery replacement must be handled by a professional.
5. Software Update
Sometimes the TPMS warning can be triggered by a software issue. Make sure your ID.3’s software is up to date by visiting a Volkswagen service center or checking the infotainment system for updates.
When to Consult a Mechanic
If the issue persists after trying these steps, it’s best to visit a certified mechanic or a Volkswagen service center for further diagnosis.